Getting started – Hardware

We first loaned an Arduino starter kit, consisting of an Arduino, breadboard, resistors and jump cables.

1.74! The only room in the University besides Middle Street with Ableton Live and MaxMSP or Max4Live. This is where we will do most of the programming, patching and construction of the software projects required.

We found this soldered shield that had been used for a previous project. This gave us some insight into how we may solder for our project. Each jump cable is going to an analogue out and they each have a resistor. However, we’d have to check what the jump cables on the right hand side indicate. Overall, this is at least an insight into how a shield can act as an easier breadboard, once soldered.